Ref

4.4. 10 LOX FILL AND DRAIN CONTROL VALVE - INSTALLATION WASHER-AN936A4 SCREW- I AN51SC4-5 JL. TUBING ASSEMBLY-10413826-43 ( REFERENCE) TUBING ASSEMBLY-10413826-43 ( REFERENCE) WASHER-AN936A4 SCREW- I AN51SC4-5 JL. TUBING ASSEMBLY-10413826-19 (REFERENCE) TUBING ASSEMBLY-10413826-19 (REFERENCE) (REFERENCE) U0CK WASHER AN960PD10L (REFERENCE) 4. 4. 11 LOX REPLENISHING CONTROL VALVE

An4 Bolt Dimensions

An4 Bolt Dimensions

FUEL TANK PRESSURE SWITCH ASSEMBLY PART NO. 10414338 The fuel tank pressure switch (B260) senses fuel tank pressure and actuates the fuel container pressurization valves (B257) at 17 0.3 psig. The pressure switch (B260) is calibrated by the pressure checkout valve (B259). 1. VENDOR - THE FREBANK COMPANY, PART NO. 4188-1 2. LOCATION - Station 887 in fuel tank No. 1. 3. SERVICE - Air, nitrogen, RP-1 vapor. 2. Differential, 2.0 psig maximum, 0. 3 psi minimum 5. TEMPERATURE - OPERATING - Minus 65 F...

FITTING

5. 12 HELIUM SUPPLY CHECK VALVE 10414014 - ADEL DIVISION GENERAL METALS CORP. ADEL DIVISION GENERAL METALS CORP. 4. 5. 13 HELIUM SUPPLY CHECK VALVE 10 414014 HELIUM SUPPLY HIGH PRESSURE O.K. SWITCH PART NO. 10414029 The high-pressure o.k. switch B414 is used to monitor the 3000 psig storage bottle, indicating whenever this 3000 psig is exceeded. 1. VENDOR - SOUTHWESTERN INDUSTRIES, INC., PART NO. 2. LOCATION - Station 885 on fin No. 2 between LOX tank No. 2 and fuel tank No. 2 on the LOX side....

Clamp

LOX REPLENISHING COUPLING WELDMENT, 10414315 4.3.21 LOX REPLENISHING COUPLING, 10414315 LOX REPLENISHING VALVE, PART NO. 10414003 The LOX replenishing valve (B157) controls the flow of LOX from the ground supply through the LOX replenishing line to the missile tanks. The valve is operated by two-way pneumatic control. 1. VENDOR - HYDROMATICS, INC., PART NO. 131K6 Rev. B. 2. LOCATION - Station 187 in fuel tank No. 2. a. Flow chamber Liquid oxygen. b. Control chamber Air, helium, or gaseous...

Detail A

INBOARD ENGINE CUTOFF SWITCH ASSEMBLY, 10414348-SECTIONAL VIEW 4. 1. 24 INBOARD ENGINE CUTOFF SWITCH FUEL FILL AND DRAIN CONNECTOR, PART NO. 10414022 The connector (B118) is used in the fuel fill and drain system in conjunction with the ground quick disconnect assembly. 1. LOCATION - Station 225, fuel tank No. 1. 4. LEAKAGE ALLOWANCE - 10 scim maximum past O ring at 10 and 50 psig. 5. LUBRICATION - Lubricate O ring with Dow-Corning QC-2-0026 grease. 4.1.25 FUEL FILL AND DRAIN CONNECTOR...

Ch

Aerospace Valve

SPHERE FILLING CHECK VALVE, 10414013 SECTIONAL VIEW 1 June 1961 ADEL DIVISION GENERAL METALS CORP 0 RING-MS29512 -6 (REFERENCE) ADEL DIVISION GENERAL METALS CORP 0 RING-MS29512 -6 (REFERENCE) 4.4. 18 SPHERE FILLING CHECK VALVE 10414013 750 PSI CONTROL PRESSURE REGULATOR PART NO. 10414038 The manually operated 750-psi control pressure regulator (B205) is used to reduce high-pressure nitrogen to approximately 750 psig for the control pressure system. 1 VENDOR - NORTH AMERICAN AVIATION, INC...

Legend

ANTI - SLOSH DEVICE (i tank 105) 4. ANTI-SLOSH DEVICE (typ s tanks) 5.INSTRUMENT CANS (4 req) 7. FIREWALL ASSY, (typ 8 places) SECTION IV PROPELLANT CONTAINER SECTION The propellant container section consists of a 105-inch diameter tank surrounded by eight 70-inch diameter tanks. The center tank and four of the outer tanks are for LOX, and the other four tanks, alternately arranged with the four LOX tanks, are for fuel. The aft sump for the 105-inch tank has a...

Places

4.5.17 PROPELLANT UTILIZATION COMPUTER FUEL DIFFERENTIAL PRESSURE TRANSDUCER PART NO. 8968259 echnical data and illustration to be supplied when availabl e . HELIUM SUPPLY CHARGING VALVES PART NO. MS2 8889- 1 The air charging valves, B429 and B430, used on the pressure regulating valve assembly 10413 622, provide a connection for charging the regulated 450 psi system. 4. 5. 18 HIGH PRESSURE AIR CHARGING VALVE MS 28889-1 SECTIONAL VIEW 4. 5. 19 HIGH PRESSURE AIR CHARGING VALVES THREE-WAY NEEDLE...

Screw Ms

Gg) * WASHER, MS 15795-208 5 PLACES 6. 1. 5 TANK VENT SOLENOID VALVE ASSEMBLY INSTALLATION GN2 HIGH PRESSURE O. K. SWITCH, PART NO. 10414029 Th O.K. switch is used in the S-V stage pressurization system to monitor the 3000 psig pressure in the storage sphere. If the pressure exceeds 3000 psig, the O.K. switch activates the solenoid valve assembly (F208) which relieves the excess pressure through the bleed baffle (F5). 1. VENDOR - SOUTH WESTERN INDUSTRIES, INC PART No. PS-3800-3050 2. LOCATION -...

Section Aa

LOX VENT EMERGENCY SWITCH ASSEMBLY 10414341 - SECTIONAL VIEW 60 PSI LOX PRESSURIZING AND RELIEF SWITCH PART NO. 10414340 The LOX pressurizing and relief switch B184 is set for 60 psia and is used to monitor and shut off LOX tank pressurization ground supply. 1. VENDOR - CENTURY ELECTRONICS AND INSTRUMENTS, INC., PART NO. 58104 A-2. 2. LOCATION - Station 839 at center LOX tank. 3. SERVICE - Gaseous oxygen, gaseous nitrogen. 1. Increasing 60 plus or minus 1.0 psia 2. Differential plus 1. 0...

QOOO poo OOOQOOi Dh Coctiboi

4. 2. 1 FUEL CONTAINER PRESSURIZATION SYSTEM SCHEMATIC SECTION B-B ENLARGED TYPICAL 2 PLACES FUEL CONTAINER UNIT ASSY 10410009 REFERENCE NOTE ONE HALF OF THE MANIFOLD IS SHOWN IN DETAIL. THE MANIFOLD HAVLES ARE IDENTICAL SEE PAGE 4.2.5 SECTION B-B ENLARGED TYPICAL 2 PLACES FUEL CONTAINER UNIT ASSY 10410009 REFERENCE NOTE ONE HALF OF THE MANIFOLD IS SHOWN IN DETAIL. THE MANIFOLD HAVLES ARE IDENTICAL SEE PAGE 4.2.5 4. 2. 2 PRESSURE MANIFOLD AND VENT ASSEMBLY TYPICAL 8 PLACES SEE PAGE 4.2.7...

Fuel Suction Line On Inboard Engines

THOMPSON ALLPAX 500 REFERENCE 10413382 EXPANSION JOINT REF MAXIMUM OFF SET - 0.250 FUEL BLEED LINE-10413826-142 BACKUP PLATE-10413075 SWIVEL NUT-4C6BX-SS TUBE-10413826 ORIFICE 10414514 CHECK VALVE-10414014 BOSS 10413067 BACKUP PLATE-10413075 BRACKET ASSY-10418054 REFERENCE BOLT-AN6DD23A WASHER-AN960C616 NUT-79E-064 BACKUP PLATE-10413075 BOSS 10413063 BLEEDER PLUG-AN814-12S GASKET-MS29512- TUBE-10413826 ORIFICE 10414514 CHECK VALVE-10414014 BOSS 10413067 BACKUP...

Poppet

Marotta Mv74 Poppet Setup

4. 3. 43 QUICK DISCONNECT COUPLING 10414320 SECTIONAL VIEW LOX BUBBLING QUICK DISCONNECT COUPLING PART NO. 10414319 The quick disconnect coupling B444 is the connection point for the LOX Bubbling line. Helium is passed through the line and into the LOX suction lines agitates the LOX and maintains an even temperature through the LOX lines . 1. VENDOR - AEROQUIP CORPORATION PART NO. 340243-4 2. LOCATION - Above each outboard engine approximately at station 112. 5. TEMPERATURE - Minus 65 F to plus...