Skylab Orbital Workshop Scientific Airlock Installation

U The plates, 1B86327-1 (solar) and -501 (anti-solar), are installed in plate containers IB833**1-1 (see Figure 2.2.10.U-3). On-orbit, the launch restraint bolts were removed and the plate was installed in the airlock. It remained installed in the SAL at all times, except when an experiment was to be installed, at which time it was returned to the plate container and kept there until the experiment is removed. 5 The depressurization coupling, 1B90775-1 was mounted on the side of each plate...

Info

Typical SAS Thermal Profile (Actual vs Predicted) The larger gradient of the a*, bual temperature is a result of the loss of the meteoroid shield. The meteoroid shield in the vicinity of Wing 1 was painted black and had a low reflectivity. The loss of the shield exposed the high reflectivity gold surface and resulted in increased albedo reflection from the OWS tank, and in the area where the parasol did not shade the OWS tank, direct solar reflection from the tank to the GAS. Figure 2.2.5.4-27...

K

O Requirements - Investigate, though x-ray and radiograph techniques, causes for separation of materials in SAS solar cells. Effects of material variables, type of solder, and solder schedule on solder wettability and Joint strength will be studied. a. A total of 212 solar cells were removed from production panels after each panel had been x-rayed. Cells and P-contact interconnects were subjected to pull and peel tests, and metallurgical analysis using Electron Microprobe analyzer, SEM, and...

Lexan Inner Tube Ftb Lamp

FLOODLIGHT OESIGN IN FORCE FROM DECEMBER 12. 1069 UNTIL JANUARY IB, 1970 Figure 2.2.7.6 2. Pictorial Hiitiry of 1BB9364 Floodlight Dtiign It was determined that CEI Specification levels of illumination could he met with a floodlight producing amp 5 or more of the oripinal intensity as specified in Source Control Drawing SCD IB6936U. Concurrently, Sylvania was proceeding vith the inve , .pation of floodlight design alternatives based on the folic zing ground rules 1 The input power to the lamp...